Can-Am DS250 - Manual (Page 120)

BRAKE
Inspection
The braking system is a hydraulic type
and no adjustment is required.
Check the following to keep the
brakes in a good operating condition:
– brake fluid level
– brake system for fluid leaks
– brake cleanliness
– brake for spongy feel
– brake discs for excessive wear and
surface condition
– brake pads for wear, damage or
looseness.
SERVICE LIMITS
Brake pads
thickness
2 mm (.079 in)
Brake discs
thickness
2 mm (.079 in)
Maximum discs
warpage
0.15 mm (.010 in)
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.
ƽ
WARNING
The brake fluid replacement or
brake system maintenance and re-
pairs should be performed by an
authorized Can-Am dealer.
118
_____________________