Can-Am DS250 - Manual (Page 74)

15) Fuse
The electrical system is protected with
a fuse. Refer to MAINTENANCE sec-
tion for details.
The fuse holder is located in the ser-
vice compartment underneath the
seat.
vmr2006-078-001_b
SERVICE COMPARTMENT UNDERNEATH
SEAT
1. Fuse holder
16) Seat Latch
Located underneath the rear fender, it
allows the removal of the seat to gain
access to the service compartment.
vmo2006-014-016_a
Seat Removal
Unlock seat using latch lever.
Gently lift rear of seat while pulling
rearward to release.
vmo2006-014-017_a
1. Seat latch
Seat Installation
Insert seat tab into frame hook.
When seat rests in its position, firmly
push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure
by giving it a tug to confirm proper
latching.
vmo2006-014-018_a
1. Tab
2. Hook
ƽ
WARNING
Make sure seat is securely latched
before riding.
17) 12-Volt Power Outlet
Convenient for handheld spotlight or
other portable equipment.
Remove protective cap to use. Al-
ways reinstall it after use to protect
against weather.
72
______________________