Can-Am DS250 - Manual (Page 121)

BODY/FRAME
Engine Area
Check engine area for any damage
and leaks.
Ensure all hose clamps
are properly secured and no hose is
cracked, kinked or otherwise dam-
aged.
Inspect muffler, battery and reservoir
fastening devices.
Check electrical connections for corro-
sion and tightness.
Replace or have damaged parts re-
paired.
Hitch/Trailer Ball
Condition (if so equipped)
Check tightness of fasteners and
tightness/condition
of trailer ball.
Properly retighten as necessary and
replace ball if worn.
Frame Fasteners
Check fastener condition and tight-
ness on the vehicle.
Retighten as
required.
Seat Fasteners
Check tightness of seat fasteners.
Retorque or replace if necessary.
Vehicle Cleaning and
Protection
Never use the high pressure washer
to clean the vehicle USE LOW PRES-
SURE ONLY (like a garden hose).
The high pressure can cause electrical
or mechanical damages.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION: Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
_____________________
119