Can-Am DS250 - Manual (Page 118)

SUSPENSION
Adjustment
ƽ
WARNING
Adjust both springs to the same
length.
Uneven adjustment can
cause poor handling and loss of
stability and/or control, and in-
crease the risk of an accident.
Spring preload may vary from rider
to rider depending upon their weight.
Preload can be changed by setting
both lock nuts up or down to com-
press the spring to different lengths.
Shorten the spring for a firmer ride and
rough road condition.
Lengthen the spring for a light load and
a smooth road condition.
vmo2006-014-049_a
FRONT SUSPENSION
A. Same length on both sides
vmo2006-014-072_a
REAR SUSPENSION
1. Preload cam
Lubrication
Swing Arm
Lubricate swing arm pivots. Use syn-
thetic grease (P/N 293 550 033) or an
equivalent.
vmo2006-014-061_a
LH SIDE OF VEHICLE
1. CVT duct
2. Grease fitting
Inspection
Front and Rear Suspension
Inspect shock absorbers for oil leaks
and fasteners for tightness. See an
authorized Can-Am dealer as neces-
sary.
116
_____________________