8 – manual operations, Manually running a program, Forcing a program to start – Baseline Systems BaseStation 3200 User Manual

Page 73: Stopping an active program

Advertising
background image

BaseStation 3200 Advanced Irrigation Controller Manual

8 – MANUAL OPERATIONS

The BaseStation 3200 has several options that enable you to manually control your irrigation system. You can force

a program to start, stop a program that is actively watering or set the next start date for a program.

You can also manually water a single zone, all zones, or the zones of a program. The Manual Water is useful for

doing a walk-about test of multiple valves, or for applying additional water for a short period of time to a specific

zone.

Manually Running a Program

Manual Run is used to force a program to start, stop a program that is actively watering, or set the NEXT start date

for a program when you are using the Historical ET Calendar interval setting.

Note: Programs that do not use the Historical ET Calendar mode have a fixed schedule and are modified in the Day

Intervals dial position. Refer to the topic for setting up the day intervals for a program on page 49.

Forcing a Program to Start

1. Turn the dial to the Manual Run Program position.
2. Make sure that the field at the top of the screen says Start or Stop

Program. If another option displays in that field, press the + button to

change the option to Start or Stop Program.

3. Press the NEXT button to move to the list of programs.
4. Press the NEXT button to move to a stopped program that you want to

start.

5. Press the + button to change the program’s status to Running.
6. Turn the dial to the Auto Run position.

Stopping an Active Program

1. Turn the dial to the Manual Run Program position.
2. Make sure that the field at the top of the screen says Start or Stop Program. If another option displays in that

field, press the + button to change the option to Start or Stop Program.

3. Press the NEXT button to move to the list of programs.
4. Press the NEXT button to move to a running program that you want to stop.
5. Press the + button to change the program’s status to Stopped.
6. Turn the dial to the Auto Run position.

Page

65

Advertising