Baseline Systems BaseStation 3200 - Manual (Page 86)

BaseStation 3200 Advanced Irrigation Controller Manual
Pause Conditions
A variety of conditions will cause the controller to pause watering, either
by specific programs or the entire controller. When one or more pause
conditions occur, the Pause Condition reports describe the reasons for the
pause conditions.
The following pause conditions can occur on the BaseStation 3200.
BL-Commander
(handheld
radio)
• All programs will be paused while running a zone using the remote handheld radio – all
programs resume when the zone is shut off.
• Press CLR to terminate the manual zone.
• Automatically cleared when the zone is done.
BaseManager
(central control
software)
• Normal operation continues while the controller is accessed by BaseManager.
• Press CLR to terminate the BaseManager connection.
• Automatically cleared when BaseManager logs off.
Event Day • An event day stops all watering and keeps programs from starting.
• Press CLR to terminate the event day.
• Automatically cleared when the event day ends.
Flow Devices • A high-flow shutdown or an over-budget shutdown stops the system from using the
specific flow device.
• Press CLR to reset a high flow shutdown condition.
• Pressing CLR does not clear an over-budget condition. Change the budget or wait until
next month.
• Not automatically cleared – the user must clear this pause condition.
Flow Switch • An open jumper or flow switch stops all watering and keeps all programs from starting.
• Pressing CLR does not reset this condition. Replace the jumper or reset the flow switch
hardware.
• Not automatically cleared – the user must clear this pause condition.
Low
Temperature
• When the temperature drops below 38 ◦ F, the system will pause all watering.
• Pressing CLR does not reset this condition. You must wait until the temperature rises.
• Automatically cleared with higher temperatures.
Pause biCoder • A pause biCoder will pause watering on specific programs.
• Pressing CLR resets the pause condition before the delay time has elapsed.
• Automatically cleared at end of the delay time.
Page 78