Carlo Gavazzi WM4-96 - Manual (Page 22)

▲
▲
22
Programming
Tariff table
17
Entering the main menu
17
24
33
the counting of the “W” and “var” energies proceed as fol-
lows:
5- Choose the C1 INPUT function by the and keys
(see the description of the selected input function and the
weight of the associated pulse under the scrolling window);
press to confirm.
6- Once the ON/OFF window appears, choose “OFF” by the
and keys to disable the counting of kWh’s and con-
firm with ; choose “ON” to enable the counting of kWh’s
and confirm with .
7- The instrument asks the user to enter the number of puls-
es to be associated to the unit increase (pulse/ kWh, ex.:
entering the value 10 the instrument will need 10 input puls-
es to display 1kWh on the counter).
8- For the C2 INPUT, enabling function of the “kvarh” count-
ing, follow steps 5 to 7. To go back to the previous menus,
press .
F
S
S
▼ ▲
S
▼ ▲
S
S ▼ ▲ 1.2..
..2.1
F
S
F
❑
Enabling the tariffs
remote control
This function enables the
control of the tariff phases of the
energy counters by means of
external pulses and not by
means of the instrument’s clock.
From the PULSE sub-menu
select and enable the “A3
INPUT” and “C3 INPUT”. Select
them one at a time by means of