Counters management – Carlo Gavazzi WM4-96 User Manual
Page 35
▲
▲
35
Counters Management
Multitariff counters
33
Graphs, AVG calcul.
34
39
43
S
F
F
S
▼
▲
S
▼
▲
1-press
: the first box (trf=tar-
iff) is highlighted;
2-press
again: the TARIFF box
will appear on the lower part of the
display; now you can choose the
tariff (from 1 to 4), e.g.: “1” by means
of
the and keys;
3-press the
key once more,
the “end tariff” hour is highlighted;
4-press the
key once more; the
HOURS box will appear on the
lower part of the display; now you
can choose the hours - e.g. 8 - by
means of the
and
keys.
5-press the
key again; the “end
tariff” minutes will be highlighted;
6-press the
key again: the MIN-
UTES box will appear on the lower
part of the display; now you can set
the desired minutes - e.g. 10 - by
means of the
and
keys.
7-after the confirmation of the last
setting, press
and you are back
to the selection of the first “trf”
parameter you have highlighted.
The “starting hour” of the following
line becomes equal to the “end
hour” you have just selected. Only
when the “trf” parameter is high-
lighted, you can scroll the parame-
ters and modify them: use the
key to access to the parame-
S
S
▼
▲
S
S
▼
▲
S
S
▼
▲
S
S
▲
1.2..
..2.1
S
▲
1.2..
..2.1
▲
▲
1.2..
..2.1
F
S
S
▼
▼
▼
▼
S
S
Proceed with the
same principle for
the following rows.
To exit any item
always use
.
F
S