Carlo Gavazzi WM4-96 - Manual (Page 9)

▲
▲
9
Displaying of the variables
Load profiles
7
Front panel
8
13
16
■
How to scroll the various pages
To scroll the various pages, use the and keys.
Pressing the key in any one of the display pages,
you access to the programming phase. The key,
on the contrary, has various functions depending on the
selected page.
■
How the key changes function depending
on the display page.
❑
Pages from "00" to "13" (00 only without measur-
ing input module). Displaying of the variables
key enabled if the alarm latch function is activated,
access to the reset of the latch alarms. To reset the latch
alarm press the key; after that the instrument will dis-
play: “ WILL YOU RESET THE LATCH ALARMS?”; If you
choose you will enable the reset procedure, if you
choose there won’t be any reset. The reset of the latch
alarm is only available if the alarm event is finished.
❑
Pages from "14" to "18" (from 01 to 02 without
measuring input module). Displaying of the “MIN”
and “MAX” values.
The key is active, that means you have access to
the reset function of the “MIN” and “MAX” values. To reset
the “MIN/MAX” recording, proceed as follows: enter the
function by pressing the key, after that a message will
appear: “WILL YOU RESET MIN/MAX VALUES? WILL YOU
CONTINUE?"; if you choose there won’t be any reset,
if you choose the reset will not be made. The and
keys allow you to select the range/value that you want
to reset; to confirm the reset press the key again. To exit
the function press the key again.
F
S
▼
▲ S
F
F
F
F
S
F
F
F
F
S
▼ ▲