Counters management – Carlo Gavazzi WM4-96 User Manual
Page 38
15-press the
key again to open the box where the day
is to be set,
16-use the
and
keys to select the desired day (from
1 to 31 depending on the previously selected month);
17-press the
key to confirm the selection and move to
th next parameter.
To program the “end date” follow the same procedure
described above from step 11 to step 16. After confirming
the “end” day by means of the
key, the HOLIDAY Box is
highlighted to indicate the conclusion of the HOLIDAY peri-
od programming cycle. You can
also use the
(moves from
right to left) and
(moves from
left to right) keys to scroll along
the available parameters.
It’s possible to choose the tariff to
be associated to the HOLIDAY
period according to the following
procedure: starting from the box
on the previous page, step 10,
press the
key again: the
instrument will display the box
shown on the left. Press
: the
box relevant to the “trf” value is highlighted; press the
key again: the instrument will display on the lower section
the box where the tariff is to be set. Select the desired tariff
(from 1 to 4) by means of the
and
keys and confirm
it with
. To reset your choices and/or exit the menus,
use the
key.
F
S
▼
▲
S
S
S
▼
▲
S
S
▼
▲
S
▲
▲
38
Counters Management
Trf Holiday period
31
Average calculation
34
38
43
From p. 38
To p. 38
▲
1.2..
..2.1
▼
S
S
F
S
S