Cooper Instruments & Systems Series M7 Professional Digital Force Gauge User Manual
Page 2
Series 7 Digital Force Gauges
User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Series 7 digital force gauge, designed for
tension and compression testing applications from 0.12 lb to 1,000 lb (0.5 N to
5,000 N) full scale. The Series 7 is an essential component of a force testing
system, typically also comprising a test stand, grips, and data collection
software.
With proper usage, we are confident that you will get many years of great
service with this product. Mark-10 force gauges are ruggedly built for many
years of service in laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation instructions.
Dimensions and specifications are also provided. For additional information or
answers to your questions, please do not hesitate to contact us. Our technical
support and engineering teams are eager to assist you.
Before use, each person who is to use the Series 7 force gauge should
be fully trained in appropriate operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW .........................................................2
POWER ...............................................................3
SETUP ................................................................4
HOME SCREEN AND CONTROLS ...................5
DIGITAL FILTERS ..............................................7
SET POINTS .......................................................8
BREAK DETECTION ..........................................9
OPERATING MODES .......................................11
DATA MEMORY AND STATISTICS ................19
FOOTSWITCH ..................................................21
COEFFICIENT OF FRICTION ..........................22
CUSTOM UNIT .................................................22
COMMUNICATIONS AND OUTPUTS .............23
CALIBRATION .................................................28
PASSWORDS ...................................................33
OTHER SETTINGS ...........................................34
SPECIFICATIONS ............................................36