Dick Cattle Stunning Apparatus - Manual (Page 14)

14
Malfunction
____________ __________________________________________
Defect Cause Repair
______________________________________________________
Ignition mechanism Firing-pin de- Send device to
does not work. formed. DICK technical
service station for
Spring of fin- inspection imme-
ning-pin de- diately.
fect.
_______________________________________________________
Trigger-lever
(8) Release mech- Send device to
does not actuate. anism defect or DICK technical
trigger-lever service station for
deformed. inspection imme-
diately.
______________________________________________________
End-piece (1790) Thread is dirty. Clean and oil thread
screws off the cart- (1790 + 2).
ridge chamber (2)
with difficulty. Thread is de- Send device to
formed. DICK technical
service station for
inspection imme-
diately.
______________________________________________________
Stunning bolt juts Damping el- Exchange damping
out of locking piece ement (14) and element and spring.
(4). spring (15) are
worn out.
Stunning bolt (5) Exchange stunning
damaged or de- bolt.
formed.
______________________________________________________
Locking piece
(4) Thread is dirty. Clean and oil thread.
screws off the sleeve
(3) with difficulty. Thread is dam- Send device to
aged. DICK technical
service station for
inspection imme-
diately.
______________________________________________________
Other malfunctions not mentioned above may only be re-
paired by specialist supplier or DICK technical service station.
______________________________________________________