Hudson Robotics SOLO - Manual (Page 11)

11
3 – Accessories
The SOLO has several options that can be purchased in additional to the SOLO they are
the following:
1- Heating/Cooling Nest
2- Shaker Nest
3- SOLOPlus (SOLO w/attached Micro10x)
Section 3.1 – Heating/Cooling Nest
The Heating/Cooling Nest requires the SOLO Accessory Platform. Your SOLO will
arrive with the SAP already attached. Unpack the H/C nest and place in the desired
location deck location (See Figure 3.1). Attach provided cables.
Figure 3.1
Section 3.2 – Shaker Nest
The Shaker Nest comes shipped separately from the SOLO. The Shaker Nest has the
same alignment holes that are located in the standard nest plates. To install the Shaker
Nest; remove one the nest location and install the Shaker Nest in that location (See
Figure3.2). Plug in the supplied power/communication cable into the Shaker Nest. Plug