Hudson Robotics SOLO - Manual (Page 53)

53
3.15.4 – Write To Output
Selecting the Write To Output action for this step will change this step’s
display to appear as follows:
This option allows a suitably configured SOLO to set a digital output
signal to the “Target Value” (1 or 0) to provide a signal to device, such as
a robot or a mechanical system.
3.15.5 – Hot/Cold Nest
If the SOLO is equipped with the Hot/Cold Nest accessory, the user can
select the temperature setpoint as well as several optional ways to use this
temperature-controlled nest: