Hudson Robotics SOLO - Manual (Page 15)

15
4 – Hardware Specifications
SOLO Pipettor SOLO Pipettor/Dispenser
Hardware features
Arm configuration One liquid handling arm
Tip configuration 1 disposable tip 1disposable tip/Pipetting Needle
Tip variety Disposable tips with or
without filters
(10,20,50,100,250 µL)
Disposable tips with or without
filters (10,20,50,100,250 µL) or
Stainless Steel Pipetting Cannula,
various gages and length are
available.
Positioning Precision:
X-axis ± 0.025mm
Y-axis ± 0.025mm
Z-axis ± 0.004mm
Motion Range
X-axis 594mm (23 3/8")
Y-axis 244mm (9 5/8")
Z-axis 101mm (4")
Liquid handling features
Pipetting ٧ ٧
Bulk Dispensing N/A ٧
No of fluid sources N/A 1,3,5,7
Syringe size 125, 250µL 25 – 10,000 µL
Wash Pump N/A Delivery of wash solution by
peristaltic pump.
Flow: 7,14,21,28 mL Software
adjustable.
Safety features
Password protection
Emergency Stop E-stop Button located on the front of the dispenser chassis
Dimensions W. 556mm (30") x D. 483mm (19") x H. 610mm(24")
Weight 27 kg (60 lb)
Power requirements Power: 60VA Voltage: 100-240VAC, Frequency: 50/60HZ
Operating conditions Temperature 15-32°C/ 59-90°F, Relative humidity 30-80%
(non condensing)
Regulatory compliance
Computer requirements PC with Microsoft Windows XP or newer
Quad Core @ 2.5 Ghz
3 Gigabytes free hard drive space
RAM : 4 Gigabytes
1 USB port