ITC Hemochron Signature Elite Whole Blood Microcoagulation System User Manual
Page 64
64
Entering Cuvette Lot Numbers and Expiration Dates
Up to five cuvette lot numbers and expiration dates can be entered for each assay type. Selection or scanning of
a cuvette lot number is only allowed when Required, Scan only, and/or Pre-stored only is specified for
Cuvette Lot Options (see page 56).
Note: Cuvette lot numbers may be scanned using the barcode scanner through the Supervisor
menu and uploaded to Configuration Manager (page 19).
Note: Cuvette lot numbers that are manually entered into the HEMOCHRON Signature Elite
instrument when running a test are only saved to that particular test record and are not
uploaded to Configuration Manager.
1.
Click Cuvette Lots on the Configuration Module dialog box (page 53) to display the Cuvette Lot
Number Entry dialog box:
2.
Select an assay from the Select Test Type drop-down list to display the form for entering cuvette lot
numbers for that assay and their expiration dates:
3.
Enter the lot number and expiration date for up to five cuvette lots.
4.
Click Save to save the cuvette lot information for the specified assay.
Note: Cancel clears and closes the Cuvette Lot Number Entry dialog box without saving entries.
Exit closes the Cuvette Lot Number Entry dialog box.