Canon SX20 - Manual (Page 23)

23
PROJECTING AN IMAGE FROM THE COMPUTER
Connecting the Projector to the Computer
Connect the projector to the computer.
Connecting to Video Terminals
• Before connecting cables, turn off both the projector and computer.
• Images may be improperly projected with digital RGB signals in 1280 x 1024 or 1400 x
1050 depending on the type of computer or DVI cable.
• The USB terminal is used to use the remote control just like the computer mouse. Images
cannot be projected simply by connecting the USB cable.
To ensure projection of high-resolution high-quality images, use of high-performance cables
is recommended.
MAC Adapter (part No. LV-AD02)
For the Macintosh having a D-sub 15-pin (standard) terminal for monitor output, use a MAC adapter.
Set the slide switches (1-6) on the adapter depending on the Macintosh mode as shown below.
To monitor output
(D-sub 15-pin)
To monitor output
(DVI terminal)
To monitor output
(mini D-sub 15-pin)
Some types of Macintosh
Supplied computer
connection cable
(for DVI/mini D-sub
15-pin) Computer
connection
cable
(for DVI)* Computer connection
cable
(for mini D-sub 15-pin)*
Some computers require adapters. If any con-
nector cannot be fit in the corresponding
socket, refer to the User’s Manual that came
with the computer.
* Use a cable available
optionally or on the
market.
This terminal can be switched to
the monitor output (analog RGB)
terminal by selecting an option
from the menu. (P69)
To monitor output
(mini D-sub 15-pin)
Computer
MAC adapter
(See the following memo.)
PROJECTING AN IMAGE
FROM THE COMPUTER