Canon SX20 - Manual (Page 47)

47
PROJECTING AN IMAGE FROM A
V
EQUIPMENT
Select a signal type.
If images are not displayed correctly,
press the button mentioned in step 4
repeatedly to select a desired input
type.
Pressing the [COMPUTER-1] button
repeatedly allows you to select DIGITAL
RGB and ANALOG RGB-1 alternately.
Pressing the [COMPUTER-2] button
repeatedly allows you to toggle between
ANALOG RGB-2 and COMPONENT.
Pressing the [VIDEO/S] button repeat-
edly allows you to toggle between
VIDEO and S-VIDEO.
• This projector cannot project
digital contents copy-protected
by the HDCP technology.
• For the input signal selection
method, refer to 56 and 57.
Play the AV equipment.
The image from the AV equipment
appears.
Top control Remote control
5
6