Canon SX20 - Manual (Page 61)

61
SETTING
UP FUNCTIONS USING
MENUS
Make this setting when the projector is
hung from the ceiling or it projects an
image on a transmissive screen.
An image is projected normally.
Select this when projecting an image
with the projector hung from the
ceiling. An image is projected with it
inverted vertically.
Select this when projecting an image
from behind the screen. An image is
projected with it inverted horizontally.
Select this when projecting an image from
behind the screen with the projector hung
from the ceiling. An image is projected
with it inverted vertically and horizontally.
When hanging the projector from the ceiling,
optional brackets are required. Contact your
Canon dealer.
None (Normal image) Ceiling mounted
Rear Rear, Ceiling mounted
A logo can be displayed from the moment
the projector is turned on to the moment it
is ready for projection.
The factory-captured Canon
logo is displayed.
An image is projected imme-
diately after the projector is
turned on.
The logo captured on the
“Logo capture” screen is dis-
played.
”User logo” cannot be selected
when no logo has been captured.
Displaying a Logo
(Projector on)
Display settings
User screen settings
Projector on
Canon logo
User logo
Skip
Display settings
Image flip H/V
When Ceiling-
mounted or for Rear
Projection