Canon SX20 - Manual (Page 31)

31
PROJECTING AN IMAGE FROM THE COMPUTER
Adjusting Keystone Distortion
If a projected picture has keystone distortion, correct it by using the keystone adjustment
feature.
1
2
Select Keystone Adjustment.
“Keystone adjustment” appears on the
screen.
Correct keystone distortion.
Keystone distortion must be corrected
while “Keystone adjustment” is displayed
on the screen. (“Keystone adjustment”
disappears 10 seconds later.)
Press the [OK] button.
To reduce the length
of the upper edge,
press [^].
To reduce the length
of the left edge, press
[<].
To reduce the length
of the lower edge,
press [v].
To reduce the length
of the right edge,
press [>].
3
Remote control Top control