Starting projection – Canon SX20 User Manual
Page 44
Advertising
44
PROJECTING AN IMAGE FROM A
V
EQUIPMENT
Remote control
Top control
Starting Projection
Connect the power cord and turn on the projector.
• Before connecting the power cord, connect the projector to the AV equipment.
• Once the projector is turned off, it cannot be turned on for about 90 seconds.
Wait until the lamp cooling period ends and the [POWER] indicator lights red.
The projection method is basically the same as that used when the projector is
connected to a computer. (P23) Lets take a look at only the topics specific to AV
equipment.
Buttons Used Here
Advertising