Canon SX20 - Manual (Page 4)

4
Supplied Manuals
User’s Manual Quick Start Guide
Symbols of Buttons
This projector can be operated using buttons on the remote control or main unit. The
remote control allows you to use all functions of the projector; however, the buttons on the
main unit allow you to use only often-used functions.
In this manual, buttons are indicated by symbols. The symbol of a button on the remote
control is shown in and the symbol of a button on the main unit is shown in .
At the beginning of each operational procedure, the position of the button used to perform
the operation is described with an illustration.
Symbols Used in This Manual
Meanings of the following symbols used in this manual are as follows:
A precaution about operation or restriction is given here.
An important matter that you should be aware of before operation or a useful tip is
provided here.
This guide shows an outline flowchart of
the work necessary to make a presentation
using this projector.
SUPPLIED MANUALS AND
SYMBOLS USED IN THIS MANUAL
This manual provides detailed information
about how to use this projector. Read this
manual thoroughly to make the most of
this projector and ensure safety.
1
Press the [MENU] button.
The Menu window appears.
- To close the Menu window, press
the [MENU] button again.
Remote control
Indicates the button on the remote control.
Indicates the button on the control on the main unit.
Top control