Canon SX20 - Manual (Page 62)

62
SETTING
UP FUNCTIONS USING
MENUS
When the color and brightness of the
displayed image can be adjusted to match
your source.
Select this to project an image with a
similar quality to that of the original
image. An image is projected with a
high regard for reproduction of white.
Select this to project an image with a
similar quality to that of the original
image. A bright and high-contract
image is projected.
Select this to project a movie. A
picture is projected with a high regard
for color tone reproduction.
Select this when you want to project
an image from a sRGB-compatible
digital camera.
An image is projected in the display
mode conforming to the sRGB
Standard.
• The quality (brightness, contrast, etc.)
of the image displayed in each image
mode can be adjusted as desired.
• The results of adjustments made by
the user for each mode are saved for
each of six types of input signals.
Selecting an
Image Mode
Image Adj. Menu
The Image adj. menu is used to make
various adjustments to the image to be
projected.
Selecting an Image Mode
[Image mode]........................................... P62
Adjusting the Brightness [Brightness] ... P63
Adjusting the Contrast [Contrast] ........... P63
Adjusting the Sharpness [Sharpness].... P64
Making a Gamma Correction [Gamma]... P64
Using the Dynamic Gamma Function
[Dynamic Gamma] .................................. P65
Adjusting the Color Level [Color level]... P65
Adjusting the Color Balance
[Color balance]........................................ P66
Correcting the Screen Color
[Screen color correction] ....................... P66
Making Advanced Color Adjustment
[Advanced color adjustment] ................ P67
Performing Progressive Processing
[Progressive] ........................................... P67
Reducing the Lamp Brightness
[Lamp mode] ........................................... P68
Resetting the Image Settings [Reset] ..... P68
Image adj.
Image mode
Presentation
Standard
Cinema
sRGB