Canon SX20 - Manual (Page 70)

70
SETTING
UP FUNCTIONS USING
MENUS
When the projector is not used, the
mercury lamp is turned off or the power is
turned off automatically for power saving.
The power management
mode is not used.
The projector enters the
power management mode. It
restarts projection when a
signal is input or an operation
button is pressed.
The projector enters the exit
mode, being turned off
automatically.
For details on Power Management
Mode, refer to P36.
Selecting the Power
Management Mode
A beep can be sounded when the power
is turned on/off or a button on the top
control or remote control is pressed.
A beep is issued.
A beep is not issued.
A beep is not issued when the
sound has been muted by pressing
the [MUTE] button.
Issuing a Beep
System settings
Power management mode
System settings
Beep
Off
Standby
Exit
On
Off