Canon SX20 - Manual (Page 42)

42
PROJECTING AN IMAGE FROM A
V
EQUIPMENT
PROJECTING AN IMAGE
FROM AV EQUIPMENT
Connecting the Projector to AV Equipment
Connect the projector and AV equipment.
Connecting to Video Terminals
• Before connecting cables, turn off both the projector and computer.
• SCART terminal is not supported.
To analog video output
(AV input
terminal)
To digital
video output
To component video output
S terminal
video cable Video
cable
Component
cable (D ter-
minal/RCA x
3)
(S-VIDEO
terminal)
Supplied component
cable (RCA/Mini D-sub
15-pin)
AV
cable
(D terminal) (DVI terminal)
(VIDEO
terminal)
(RCA terminal)
DVI
cable
*A component cable
available on the
market is required
to connect the
projector to AV
equipment. (See
memo.)
Component
cable (RCA x 3)
About the Component Cable
The projector cannot be connected to AV equipment using only the supplied component
cable (RCA/Mini D-sub 15-pin). Purchase either of the following cables according to the
type of the terminal on the AV equipment:
• RCA terminal: RCA x 3/RCA x 3
• D-terminal: D-terminal/ RCA x 3