Baumer G1-G2-GB-GXxxx - Manual (Page 12)

Manual_ProGeber_V1-40_EN.doc 12/40 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
The programming mask now enables the programming of all parameters that are possible for
the respective encoder.
The mask may vary according to the corresponding encoder model
The parameters for the encoder can be set by means of the register cards for the resolution
and the outputs. The dialog window gives additional support, or that is to say explains the
window that has just been selected.
See chapter 4.2 for register cards „Resolution“.
The explanation for the register cards „Outputs for Parallel Encoders“ see chapter 4.3 and
„Outputs for SSI Encoders“ see chapter 4.4.
Dialog window
Register
card for the
resolution
Register
card for the
outputs