Baumer G1-G2-GB-GXxxx - Manual (Page 29)

Manual_ProGeber_V1-40_EN.doc 29/40 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.5 Explanation of mask „Position display“
Click „Extras ⇒ Display position" to select a display module displaying the positions and the
special outputs.
After the start of the display module, the following mask appears (the mask can vary slightly
according to the type of encoder and the programming).
N° Field
1 Position value revolutions
2 Position value steps
3 Bar display entire resolution
4 Display steps / revolution
5 Display field for the set preselections
6 Display field for the special outputs
1
3
5
6
2
4