Baumer G1-G2-GB-GXxxx - Manual (Page 36)

Manual_ProGeber_V1-40_EN.doc 36/40 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
Contact assignment for hollow shaft encoder:
Hollow shaft
function D-SUB connector,
37-pin PC contact
D-SUB, 9-pin
UB Pin 36 -
RxD Pin 35 Pin 3
GND Pin 37 Pin 5
TxD Pin 34 Pin 2
Br. Pin 4 to 6
Br. Pin 7 to 8
Also connect the encoder via the device plug to voltage (UB/red and GND/blue).
Accessories: Z 139.006
Programming cable for parallel encoder with hollow shaft
Programming software ProGeber
Manual on CD