Baumer G1-G2-GB-GXxxx User Manual
Page 37
Advertising
Manual_ProGeber_V1-40_EN.doc 37/40
Baumer IVO GmbH & Co. KG
10.05.11
Villingen-Schwenningen,
Germany
5.1.2 Contact SSI encoder
To program the SSI encoder with the PC, the lines TxD, RxD and GND must be connected.
Contact assignment:
Encoder function M23 connector,
16-pin
PC contact
D-SUB, 9-pin
UB
Pin 15
-
RxD
Pin 5
Pin 3
GND
Pin 12
Pin 5
TxD
Pin 4
Pin 2
Br. Pin 4 to 6
Br. Pin 7 to 8
Also connect encoder via the device plug to voltage (UB/red and GND/blue).
Accessories:
Z 139.004
Programming cable for SSI shaft encoders and encoders with
hollow
shaft
Programming software ProGeber
Manual on CD
Advertising