Baumer G1-G2-GB-GXxxx - Manual (Page 22)

Manual_ProGeber_V1-40_EN.doc 22/40 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.3 Explanation of programming mask „outputs“ for parallel encoders
The programming mask „outputs for parallel encoders“ is adapted to the connected encoder.
Fields highlighted in grey cannot be changed for the selected type in question. The following
mask shows a typical encoder with parallel output. The individual parameters are explained in
detail below.
N° Chapter Field
1 4.3.1 Special outputs
2 4.3.2 Least significant bit revolutions
3 4.3.3 Domain special outputs
4 4.3.4 Output logic
5 4.3.5 Steps
6 4.3.6 Revolutions
1
6
5
4
3
2