Ipac-gl1, Processors – Crestron electronic Green Light GLPS-HSW-FT User Manual

Page 54

Advertising
background image

Crestron Commercial Lighting Design Guide



Processors

IPAC-GL1

The Crestron IPAC is a 2-Series control processor designed for wall mount installation. Its front panel controls and LCD display deliver a
user-friendly interface for out-of-the-box system setup. Built-in Ethernet, Cresnet, RS-232, relay, and sensor inputs provide direct
connectivity for interfacing with all kinds of devices, controls, and networks. The onboard e-Control® Web server allows for complete
integration as part of a facility-wide managed control network.














Design Recommendations: The total number of Cresnet devices should not exceed 60.
Dimmed and Switched Load Amounts:
Up to 210 loads
Keypad Amounts: 16
Touchpanel Amounts: 2
Control Ports: 1 Cresnet port, 1 10/100 Ethernet port, 2 bi-directional RS-232 ports, 4 relays, 4 digital or analog inputs
Other: 500 time clock events, up to 30 occupancy sensors and photocell sensors
Power: The IPAC-GL1 requires a separate supplemental power supply. It is recommended that the power fed to the IPAC-GL1 comes
from a clean and uninterrupted source.

Processor

CPU

32-bit Freescale ColdFire Microprocessor

Memory

SDRAM

32 MB

NVRAM

1 MB

Flash

8 MB

Power Failure Memory

10 years

Operating System

Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; includes default program for Green
Light Power Switching systems

Ethernet

10/100Base-T, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in web server
and e-mail client; supports Crestron e-Control2 XPanel and RoomView

Applications

LCD Display

Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight

Power Requirements

Main Power Consumption

10 Watts (0.42 Amps) @ 24 Volts DC; (Power supply sold separately)

Available Cresnet Power

40 Watts using GLA-PWS50 power supply (sold separately)

Environmental

Temperature

32° to 104°F (0° to 40°C)

Humidity

10% to 90% RH (non-condensing)

Heat Dissipation

20 BTU/Hr

Testing & Compliance

UL listed, FCC Part 15, CEC Title 24

Advertising