Virid ian, Sample screen shots – Crestron electronic Green Light GLPS-HSW-FT User Manual
Page 75
Crestron Commercial Lighting Design Guide
71
Virid
ian
Sample Screen Shots
Above is a liveVIEW window showing the total energy usage for
a building over one day. The green portion of the graph
represents energy produced by an on-site renewable energy
source. The gray area is energy provided by the power grid,
natural gas or other sources. Energy use is broken down by
area, usage type, and energy source type in the pie charts.
Above is an example report (in the PDF standard). This report
shows the energy usage for the ground floor of the building.
The current and average usage is listed for each room on the
ground floor. This data is also depicted in the pie chart.
The monitor and control window allows a manager to access
each room across an organization. In this example, the
locations are divided by state, city, and building. After selecting
a location, the manager can view a floor plan, monitor the
status of a room, and make manual adjustments. Upcoming
and past events are shown at the bottom.
The scheduler window allows a manager to schedule recurring
events. This easy to use interface can set lights to turn on or
off at a specified time, change the room temperature set point,
and perform many other tasks automatically. It also can
schedule temporary overrides for special events.