Keypads, User interfaces, Cameo – Crestron electronic Green Light GLPS-HSW-FT User Manual
Page 60
Crestron Commercial Lighting Design Guide
5
User Interfaces
Keypads
Cameo
Crestron Cameo presents a fresh, innovative concept in keypad
design featuring an incredibly small footprint and slim profile with
versatile button configurations. Use Cameo keypads as a simple
interface for controlling lights, shades, motors, or even an AV
system connected to the control system.
Cameo Standard Mount (C2N-CBD-TS)
The C2N-CBD-TS is a standard mount model designed for
installation in a conventional electrical gang-box using a decorator
faceplate (shown in picture but not included). New gloss and
matte finishes match perfectly with popular off-the-shelf decorator
faceplates. Available in a variety of designer colors, the gloss
finish has a slick, glossy appearance, while the matte finish
achieves a softer, satiny look.
.
Cameo Standard Mount w/infiNET EX (INET-CBDEX)
Cameo is also available with infiNET EX in the INET-CBDEX. The
INET-CBDEX is a standard mount Cameo keypad with similar*
features as the C2N-CBD-TS, plus infiNET EX. Crestron's
groundbreaking infiNET EX wireless technology affords reliable 2-
way communications throughout a home or office structure
without the need for physical control wiring. Employing a 2.4 GHz
mesh network topology, every infiNET EX device functions as an
RF extender, increasing effective range and reinforcing the
complete network by providing multiple redundant signal paths
within the mesh network.
Cameo Flush Mount (C2N-CBF-T)
The Cameo unique flush mount design affords a very discreet
appearance occupying just one-third the space of a conventional
keypad. Employing a smart spring clamp mounting system, the
C2N-CBF-T Cameo Flush Mount model installs easily in drywall
without requiring a backbox. Five designer colors are available,
each with a satiny, textured finish
Customizable Buttons
Exquisitely simple yet highly customizable, a single Cameo keypad
can be configured easily by the installer to provide from two to six
buttons. There are three button sizes: small (1/6 keypad height),
medium (1/3 keypad height), and large (1/2 keypad height).
Auto-dimming Backlight
Cameo's high-quality backlit laser engraving provides customizable button text that's easy to read under any lighting condition. A built-
in light sensor controls the backlight intensity automatically to achieve a crisp, legible appearance in both darkened and fully lit rooms.
Contact Closure Inputs
Two sensing inputs are included on the rear of the keypad to provide a simple and convenient interface for low voltage contact-closure
devices such as occupancy sensors, door switches, and motion detectors.
*Note: Contact closure inputs not available on the wireless infiNET EX model.
Standard Mount
C2N-CBD-TS & INET-CBD
Flush Mount
C2N-CBF-T