Connecting the projector to a desktop computer – Compaq MP4800 User Manual
Page 15
Advertising
2–4
Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Projector
Connecting the Projector to a Desktop Computer
1. Connect one end of the projector signal cable into the side of
the projector and the other end to the DVI connector 1A or
the VGA connector 1B on the desktop computer and tighten
the screws.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord 2 into the side of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
261794-001.book Page 4 Tuesday, January 22, 2002 2:20 PM
Advertising