Connecting an hdtv device – Compaq MP4800 User Manual
Page 51
Advertising
6–6
Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Home Theater Kit
Connecting an HDTV Device
1. Connect one end of the VGA-to-HDTV/component video
cable 1 to the HDTV device.
2. Connect the other end of the VGA-to-HDTV/component
video cable to the VGA connector 2 on the Input/Output
Panel on the projector.
3. Connect the dual end of the Home Theater audio cable to the
HDTV device 3.
4. Connect the single end of the Home Theater audio cable to
the audio connector on the Input/Output Panel on the
projector 4.
5. Connect one end of the power cord into the side of the
projector and the other end to an electrical outlet that is easily
accessible and close to the projector.
261794-001.book Page 6 Tuesday, January 22, 2002 2:20 PM
Advertising