Compaq MP4800 - Manual (Page 59)

Care and Maintenance
Compaq iPAQ Microportable Projector MP4800 User’s Guide 7–5
7. Remove the three screws from the lamp module 3.
8. Pull the lever up 4 and pull the lamp module straight out of
the projector 5.
Å
WARNING: To reduce the risk of personal injury, do not drop the lamp
module or touch the glass bulb. The glass may shatter and cause an
injury if it is dropped.
Reverse the previous steps to replace the lamp module.
Å
WARNING: The lamp contains < 0.125 percent mercury by weight. If
the projection lamp breaks, the mercury may be released into the
atmosphere. Please follow applicable federal, state, and local
regulations for disposal and/or recycling.
261794-001.book Page 5 Tuesday, January 22, 2002 2:20 PM