Connecting a personal computer (pc) – Compaq MP4800 User Manual
Page 52
Advertising
Using the Home Theater Kit
Compaq iPAQ Microportable Projector MP4800 User’s Guide
6–7
Connecting a Personal Computer (PC)
1. Connect one end of the VGA cable that came with the
projector to the VGA connector 1 on the Input/Output Panel
on the projector.
2. Connect the other end of the VGA cable to the PC 2.
3. Connect one end of the PC audio cable to the PC 3.
4. Connect the other end of the PC audio cable to the audio
connector on the Input/Output Panel on the projector 4.
5. Connect one end of the power cord into the side of the
projector and the other end to an electrical outlet that is easily
accessible and close to the projector.
261794-001.book Page 7 Tuesday, January 22, 2002 2:20 PM
Advertising