Compaq MP4800 - Manual (Page 9)

Getting Started
Compaq iPAQ Microportable Projector MP4800 User’s Guide 1–7
To use standby mode, press the Standby button and, after a six to
ten second delay, the unit enters Standby mode and the projector
lamp turns off. A “Going to Standby” message appears on the
screen for the duration of the six to ten second delay. When the
message disappears from the screen, there is a 45 second delay
before the lamp can be turned back on. Wait 45 seconds to allow
the lamp to cool before pressing the
Standby button again. To
avoid going to Standby, press the Standby button again within the
first five seconds.
7 Source button Selects the input source.
8 Minus button Selects and adjusts the on-screen
scroll-down menu functions.
9 Plus button Selects and adjusts the on-screen
scroll-up menu functions.
Identifying the Projector Buttons (Continued)
Symbol Control Function
261794-001.book Page 7 Tuesday, January 22, 2002 2:20 PM