Compaq MP4800 - Manual (Page 32)

3–8 Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the On-Screen Display Menu
❏ Clock Phase—Increases/decreases the value to minimize
video distortion or video jitter. This selection is not
available when a source is connected to the DVI
connector.
✎
If the projector image becomes distorted when adjusting the
Clock and Clock Phase values, continue adjusting the values until
the distortion disappears. To restore the factory settings, select
Factory Reset in the on-screen display menu, or press the
Resync
button.
❏ Zoom—Magnifies an image up to a factor of 32 on the
projection screen (zooms in to a specific area on the
screen, and pans left, right, up, and down).
❏ Vertical Keystone—Adjusts image distortion at the top
and bottom widths of the screen caused by tilting the
projector.
❏ Flip Image—Allows the projected image to be rotated.
■ Color—Adjusts color balance to compensate for ambient
conditions using three submenus:
❏ 7100 K—Factory default
❏ Custom Color—Modifies the color temperature balance.
Displayed only when VGA sources are displayed. You
can independently adjust the red, green, and blue colors
using this selection.
✎
If Custom Color is modified and saved, this selection will not be
reset if the Factory Reset selection is later used. To restore factory
color settings, select 7100 K.
❏ Video Adjustments—Modifies the color intensity.
Displayed only when video sources are displayed.
261794-001.book Page 8 Tuesday, January 22, 2002 2:20 PM