Compaq MP4800 - Manual (Page 27)

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP4800 User’s Guide 3–3
Sample On-Screen Display Menu Adjustment
Below is an example of how to operate the on-screen
display menu.
1. To select the Image Control function, press the Minus (-)
button until Image Control is highlighted, then press the
Enter/Accept button on the projector to display the level 2
menu for Image Control. The level 2 menu displays
expanded menu items.
2. To make a selection from the level 2 menu, press the Minus (-)
button to scroll down the level 2 menu, or press the Plus (+)
button to reverse the scroll direction.
3. Highlight the selection and press the Enter/Accept button to
confirm the selection. The level 3 menu displays.
✎
There is no Enter/Accept button on the remote control. If you are
using the remote control to operate the on-screen display menu,
press the
Menu button again to accept changes.
4. Level 3 for Image Control functions display the adjustment
scales. Use the Minus (-) button to decrease and the Plus (+)
button to increase the screen Horizontal and Vertical
positions.
✎
Some menu functions display adjustment scales in the level
2 menu, while others display adjustment scales in the level 3
or level 4 menus.
5. After making the adjustment, select Save and Return. To
void any changes made, select Cancel instead of Save and
Return.
261794-001.book Page 3 Tuesday, January 22, 2002 2:20 PM