Compaq MP4800 - Manual (Page 20)

Using the Projector
Compaq iPAQ Microportable Projector MP4800 User’s Guide 2–9
Powering Off the Projector
1. Press the Standby button 1 to turn off the projector lamp.
The message “Going to Standby” displays and the LED on
the
Standby button blinks amber.
✎
Allow the projector to cool down for about five to ten minutes
before turning it off.
2. Turn off the main power switch 2 on the side of the projector.
Ä
CAUTION: After the projector is turned off, wait at least 45 seconds
before turning the projector back on. Failure to follow this caution can
result in damage to the projector.
3. Disconnect the power cord from the electrical outlet and the
projector 3.
261794-001.book Page 9 Tuesday, January 22, 2002 2:20 PM