Compaq MP4800 - Manual (Page 67)

Troubleshooting
Compaq iPAQ Microportable Projector MP4800 User’s Guide 8–7
Remote control does not operate 1. Ensure the remote control is
pointed at the sensor and is within
21.0 feet (6.4 meters) of the
projector.
2. The two AAA batteries may need to
be replaced.
3. Verify that the batteries are
installed properly.
Remote mouse does not operate
computer Make sure the USB cable is connected
to both the computer and the projector.
Compatibility issues with
equipment attached to the
projector Contact your Compaq authorized
service provider or call Compaq
Customer Support for help. Refer to the
Worldwide Telephone Numbers booklet
included in the projector documentation
kit for a complete list of customer
support numbers to call.
Image size is too small or too large 1. Adjust the digital zoom or move
the camera until the image is the
desired size.
2. The projector may be set to display
in the center of the display area
without any expansion. To change
the setting, access the on-screen
display menu, select A/V & HDTV
Control, select HDTV/Video, then
select how the image should be
shown in the display area. Refer to
Chapter 3, “Using the On-Screen
Display Menu” for more information.
Troubleshooting (Continued)
Problem Solutions
261794-001.book Page 7 Tuesday, January 22, 2002 2:20 PM