Dell POWEREDGE M1000E - Manual (Page 111)

Default Settings 111
6
Default Settings
This section describes the default settings for many of the software features
on the PowerConnect M6220, M6348, M8024, and M8024-k switches.
Table 6-1. Default Settings
Feature Default
IP address None
Subnet mask None
Default gateway None
DHCP client Enabled on out-of-band (OOB) interface.
Disabled on Management VLAN (inband
management ports).
Management VLAN ID 1
VLAN 1 Members All switch ports
SDM template Dual IPv4 and IPv6 routing
Simple mode Disabled—PCM6220, PCM6348, and
PCM8024
Enabled —PCM8024-k
Users root
- password: calvin
- level: 15
Minimum password length 8 characters
IPv6 management mode Enabled
SNTP client Disabled
Global logging Enabled
Switch auditing Disabled
CLI command logging Disabled
Web logging Disabled