Crisp Solutions UC-515 - Manual (Page 11)

Chapter 2
G
ETTING
S
TARTED
This chapter will guide you through the steps for inserting
the batteries and using the UCommand’s many features.
Power Supply
UCommand UC-515 operates on four AAA batteries.
Batteries are required before you can operate your
UCommand. To insert the batteries, refer to the following
illustration:
A. Open the battery
cover by pushing
in the direction of
the arrow.
B. Insert the
batteries.
Make sure you
insert the batteries
according to the
marking inside the
battery case.
Figure 2-1: Inserting the batteries