Crisp Solutions UC-515 - Manual (Page 34)

Chapter 3-Operating UCommand UC-515
28
Press Power. This
powers your VCR
on.
1
Press Play. This
command will start
playing the tape in
your VCR.
Press Learn again to
complete the current
macro setup. You
can then continue to
set up another
macro function, or
press Learn twice to
exit the macro
setup.
1
1
Running the Macro
To run the macro, press the button that you assigned when
you recorded the macro. In the preceding example the
following events will happen when you press 1 in the AUX
device screen:
1. TV turns on
2. Ten second delay
3. TV switches to video mode