Crisp Solutions UC-515 - Manual (Page 39)

UCommand User’s Guide
Recalling the Original LCD Layout 33
Recalling the Original LCD Layout
You can reset the LCD panel buttons to their original factory
configuration. Any configurations you have made will be
lost. The learned codes are not deleted; to delete those,
refer to Using the Delete Function on page 16.
To recall the original LCD layout, press the TV and DVD
device buttons at the same time for five seconds:
Figure 3-3: Recalling the original LCD panel configuration
You will hear a beep
and then you will see
the backlight adjust
mode enable screen to
the right.
Note: This screen
prevents you from
accidentally modifying
your UCommand .
UCommand beeps several times and returns to normal view.
The original LCD panel configuration is recalled.