Crisp Solutions UC-515 - Manual (Page 13)

UCommand User’s Guide
The LCD 7
•
Be sure to replace the batteries if they have been used for
longer than two years: there might be a danger of leakage.
•
Your device configuration data is stored in on-board flash
memory and will be automatically saved when batteries are
being replaced.
The LCD
The LCD (Liquid Crystal Display) touch screen enables you
to configure and operate your UCommand with the touch of
a finger.
Turning the LCD on
To turn the LCD panel on, simply tap the screen with your
finger:
1
1
Figure 2-3: Turning the LCD on
Touch Screen Precautions
Please read the following instructions carefully:
•
Tap the LCD touch screen gently; never use force.
•
Do not use a pen or any sharp object to tap the screen;
otherwise, you might damage the surface. You can use a blunt
object such as a pencil eraser or the cap of a pen.
•
Keep the LCD dry. Wipe off any spills immediately.
UCommand is not waterproof; never immerse it in liquid.
•
Don’t expose UCommand to extreme temperatures. Keep it
away from heat sources.