Crisp Solutions UC-515 - Manual (Page 31)

UCommand User’s Guide
Macro Function 25
Macro Example
The following example will help you to better understand
recording a macro. This macro would be used to turn on
your TV, switch to VCR input, and start playing a tape:
Press the macro
button for three
seconds to enter
macro setup mode.
1
Press each number
button until it
disappears.
Press the AUX
button to open the
AUX screen. Then
press 1. You will
hear three beeps.
The 1 button in the
AUX screen will be
used to start the
macro during normal
operation mode.
Note: Do not use a
device button as
your macro run
button.
B. Press AUX to open the AUX screen
1
B. Press 1 to assign the macro start button