Crisp Solutions UC-515 - Manual (Page 26)

Chapter 3-Operating UCommand UC-515
20
Changing the LCD Layout
The device Edit mode enables you to delete buttons or
change the icons on buttons in the device menus. For a
drawing that shows all available icons, see Appendix A.
Follow these instructions:
Press the button of
the device that you
want to configure for
three seconds. The
display will start
flashing
You will hear a
beep, and then you
will see the setup
mode enable screen
to the right.
Note: This screen
prevents you from
accidentally
modifying your
UCommand.
Press each number
button until it
disappears.