Crisp Solutions UC-515 - Manual (Page 28)

Chapter 3-Operating UCommand UC-515
22
in device Edit mode
or refer to Appendix
A.
After you have made
your changes, press
the device button
again. You will hear
three beeps and
UCommand will go
back to normal
operational mode.
A.
Changing the AUX Device Layout
The AUX Device screen layout can be made identical to
any of the other device buttons. Enter LCD layout edit mode
for the AUX Device button by pressing the AUX button for
three seconds (for details refer to Changing the LCD
Layout). When the screen flashes, press the device button
of the device you want to copy. This device layout is copied
to the AUX button. Press the AUX button again. You will
hear three beeps and UCommand will return to normal
operating mode.
Macro Function
The macro feature enables you to store up to 25 commands
for each macro. When you have created a macro, you will
be able to run a chain of commands by pushing only one
button. You can assign macros to any regular button but not
to device buttons.
Macro Setup
Follow these instructions to set up a macro: